Welcome to the website of Dongguan Kexinglong Kitchen Equipment Technology Co., Ltd.!

Kexinglong kitchenware-quality first, ingenuity

Focus on stainless steel kitchen equipment design, production, sales, installation services

National Advisory Hotline: +86-135-3264-3149
Cleaning stainless steel kitchen equipment

From:Internet Posted on:2021-04-30

Don’t look at large kitchen equipment is cold stainless steel It is made, but it has a soft "heart". After all, it is indispensable for the protection of large-scale kitchen equipment in a special environment such as the kitchen. The kitchen cabinet itself has been fundamentally moisture-proof, but it is still not allowed to flush the cabinet directly or for a long time to prevent the board from being damaged due to moisture. Therefore, the surface of the cabinet is stained with water, and it should be wiped dry immediately with a dry cloth.

large kitchen equipment

The material of stainless steel is very good, it has the characteristics of wear resistance, corrosion resistance and so on. Nowadays, the number and types of stainless steel kitchen equipment are increasing. When cleaning stainless steel kitchen equipment, care should be taken not to scratch the surface. Do not use strong alkalis, strong acids or strong oxidizing chemicals, such as soda, bleaching powder, etc. for cleaning. Stainless steel kitchen equipment can be cleaned with a cloth in a neutral detergent aqueous solution. Do not soak for a long time. If the surface is dark and dark, you can wipe it with a soft cloth dipped in detergent or detergent. Do not use steel balls, knives, etc. The device is scratched.

Stainless steel kitchen equipment cleaning method:

1. Be careful not to scratch the surface. Do not use rough and sharp materials to scrub the surface of stainless steel, especially mirrored ones. Use a softer, non-shedding cloth to scrub. Sand steel and brushed surfaces should follow. Wipe the lines, otherwise it will be easy to mess up the surface;

2. Avoid using detergents, steel wire balls, abrasive tools, etc. containing bleaching ingredients and abrasives. In order to avoid residual detergents from corroding the stainless steel surface, rinse the surface with clean water at the end of the washing;

3. If there is dust on the stainless steel surface and the dirt is easy to remove, it can be washed with soap or weak washing, and the binder component should be scrubbed with alcohol or organic solvent;

4. Grease, oil, lubricating oil pollution on the surface of stainless steel, wipe it with a soft cloth, and then use neutral detergent or ammonia solution or special detergent to clean it.